Summary：Generally speaking, there are many factors that affect the production capacity of the impact crusher…

Generally speaking, there are many factors that affect the production capacity of the impact crusher, generally speaking, there are 5 factors:
1,the hardness of the material: the harder the more difficult to break up the material, and the more serious the wear and tear of equipment, crushing speed, low capacity, so we need to pay attention to the selection of materials.
2,material: enter the impact crusher, fine powder material containing more and more influence is broken, because of the fine powder easy adhesion effect delivery, so the fine powder content materials should advance once sieve, the fine powder as far as possible from the material selected, in order to avoid the impact of normal crusher work.
3,fineness material after crushing by impact crusher : fineness requirements, namely breaking out of the material is fine, then crushing capacity is small, in this regard to the specific request, such as no special requirements, general materials will set system as the fineness of fine.
4,viscosity: the material viscosity is bigger, more easy to adhesion, viscosity of material in the red impact crusher in the inner wall of the crushing cavity adhesion, if not timely, will affect the impact crusher work efficiency, serious when still can affect the normal work of the impact crusher. Therefore, in the choice of materials, we must pay attention to the viscosity of the material is not too large.
5,he humidity of the material: that is, the moisture content of the material is larger, the material is easy to stick in the impact crusher, also easy to cause the blockage in the feeding process, resulting in reduced crushing capacity. To solve these problems, first of all in the material choice to strictly control the material humidity, if the selection of materials of the humidity is too big, can use sunlight or dry and other ways to reduce the material moisture percentage.